Kingston FURY KF552C40BWAK2-16 is a kit of two 1G x 64-bit (8GB) DDR5-5200 CL40 SDRAM (Synchronous DRAM) 1Rx16, memory module, based on four 1G x 16-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 16GB. Each module has been tested to run at DDR5-5200 at a low latency timing of 40-40-40 at 1.25V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
Memory (RAM), RAM DDR4/DDR5
Kingston System Memory
$372.43
- PC 16 GB DDR5 5200 MT/s
- 288-pin DIMM 2 x 8 GB
- CAS latency: 40
- 1.25 V
- ECC
- Intel Extreme Memory Profile (XMP) 3.0
Out of stock
| Weight | 0.3 lbs |
|---|---|
| Dimensions | 0.6 × 4.8 × 6.8 in |
| On-Die ECC | Yes |
| CAS latency | 40 |
| Internal memory | 16 GB |
| Memory layout (modules x size) | 2 x 8 GB |
| Internal memory type | DDR5 |
| Memory data transfer rate | 5200 MT/s |
| Component for | PC |
| Memory form factor | 288-pin DIMM |
| ECC | Yes |
| Memory voltage | 1.25 V |
| Intel Extreme Memory Profile (XMP) | Yes |
| Intel Extreme Memory Profile (XMP) version | 3.0 |
| Lead plating | Gold |
| Operating temperature (T-T) | 0 – 85 °C |
| Storage temperature (T-T) | -55 – 100 °C |
| Width | 133.3 mm |
| Depth | 7.11 mm |
| Height | 42.2 mm |

