,

4GB 3200MHz DDR4 Non-ECC CL22

$43.53

  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Single-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 8 internal banks; 2 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

Out of stock

SKU: KVR32N22S64 Categories: ,

ValueRAM’s KVR32N22S6/4 is a 512M x 64-bit (4GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

Weight 0.05 lbs
Dimensions 1.7 × 5.7 × 0.3 in
CAS latency

22

Internal memory

4 GB

Memory layout (modules x size)

1 x 4 GB

Internal memory type

DDR4

Memory data transfer rate

3200 MT/s

Component for

PC/Server

Memory form factor

288-pin DIMM

ECC

No

Buffered memory type

Unregistered (unbuffered)

Memory ranking

1

Memory voltage

1.2 V

Module configuration

512M x 64

Row cycle time

45.75 ns

Refresh row cycle time

350 ns

Row active time

32 ns

Programming power voltage (VPP)

2.5 V

Lead plating

Gold

JEDEC standard

Yes

Operating temperature (T-T)

0 – 85 °C

Storage temperature (T-T)

-55 – 100 °C

Compliance certificates

RoHS

Width

133.3 mm

Height

31.2 mm

Harmonized System (HS) code

84733020

Country of origin

Taiwan

Doesn't contain

Halogen